Gasket kit for double barrel carburettor

Carburetor gasket kit for double barrel carburattors. Fits both 26/18 and 24/21 carburettors. Includes 3 copper washer, 1 rubber O-ring, 2 base gasket, 1 lid gasket, 1 gasket for vacuum pump.

We recommend that you level the carburettor base and also check the manifold. The surfaces must be clean and flat. If that is the case, just fitting a new thick gasket (A1.1133) will be enough to make the whole thing function without a vacuum leak. Only if you cannot get the surfaces of the carburettor or manifold flat, fitting a thin gasket at the bottom and top is a solution (A1.1176). Attention: Never use liquid gasket and tighten the M8 nuts evenly.