Burton Car Company will be closed due to a company visit to our colleagues in France from Thursday 14 to Saturday 16 March. The webshop will, of course, remain open. Orders placed before 10 March will be delivered no later than 13 March. Orders placed after 10 March will be delivered from 20 March.
This short spring for the back is as long as the
original spring, 170mm. It is developed for people
who want to give the 2CV a more sporty ride or to
load heavier. The spring is 80% uprated, which
will lessen the 2CV wobble in a curve. When
lowering the 2CV it is advisable to use this
spring. Also with this spring, a 2CV can be loaded
heavier without falling straight through its
hooves. Please note that 1 short spring
and 1 long spring (A1.8358) is required per spring
cylinder. When lowering the 2CV, choose the
long tie rod end eye (A1.8365). Due to the
thick wire of the spring, it is tighter in the
spring pot. Our advice is therefore also to use a
lot of grease on the spring.