Reconditioning set double barrel Solex carburettor

This carburetter gasket set lets you clean and rebuild your two=stage carburettor. The jets that come with this kit are suited for the 26/18 (2CV) carburettor, but when you can reuse your 24/21 jets, this set will also fit on that type of (Dyane) carburettor. See als our more complete set: A1.1196. 

We recommend that you level the carburettor base and also check the manifold. The surfaces must be clean and flat. If that is the case, just fitting a new thick gasket (A1.1133) will be enough to make the whole thing function without a vacuum leak. Only if you cannot get the surfaces of the carburettor or manifold flat, fitting a thin gasket at the bottom and top is a solution (A1.1176). Attention: Never use liquid gasket and tighten the M8 nuts evenly.